/**
  @page HID_Standalone USB Device Human Interface (HID) application
  
  @verbatim
  ******************** (C) COPYRIGHT 2017 STMicroelectronics *******************
  * @file    USB_Device/HID_Standalone/readme.txt 
  * @author  MCD Application Team
  * @brief   Description of the USB HID application.
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2017 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
   @endverbatim

@par Application Description 

This application shows how to use the USB device application based on the Human Interface (HID) on the STM32F4xx devices.

This is a typical application on how to use the STM32F429ZI USB OTG Device peripheral where the STM32 MCU is
enumerated as a HID device using the native PC Host HID driver to which the NUCLEO-F429ZI 
board is connected, in order to emulate the mouse using user button mounted on nucleo board.
 
This application supports remote wakeup (which is the ability of a USB device to bring a suspended bus back
to the active condition), and the Key button is used as the remote wakeup source. 
   
By default, in Windows powered PC the Power Management feature of USB mouse devices is turned off.
This setting is different from classic PS/2 computer functionality. Therefore, to enable the Wake from 
standby option, user must manually turn on the Power Management feature for the USB mouse.

To manually enable the wake from standby option for the USB mouse, proceed as follows: 
 - Start "Device Manager",
 - Select "Mice and other pointing devices",
 - Select the "HID-compliant mouse" device 
 - Make sure that PID &VID are equal to 0x5710 & 0x0483 respectively by selecting "Details" tab 
   and setting Property to "Hardware Ids"
 - Right click and select "Properties", 
 - Select "Power Management" tab,
 - Finally click to select "Allow this device to wake the computer" check box.

The function GetPointerData() is responsible to move the mouse cursor automatically,
which can be easily customized (square, circle...). In this application the cursor
is moving forward and backward in an infinite loop.
 
LED1, LED2 and LED3 are blinking continuously. 
 
@note Care must be taken when using HAL_Delay(), this function provides accurate delay (in milliseconds)
      based on variable incremented in SysTick ISR. This implies that if HAL_Delay() is called from
      a peripheral ISR process, then the SysTick interrupt must have higher priority (numerically lower)
      than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
      To change the SysTick interrupt priority you have to use HAL_NVIC_SetPriority() function.
      
@note The application needs to ensure that the SysTick time base is always set to 1 millisecond
      to have correct HAL operation.
      
For more details about the STM32Cube USB Device library, please refer to UM1734 
"STM32Cube USB Device library".

@par Keywords

Connectivity, USB_Device, USB, HID, Full Speed, High Speed, Joystick, Mouse, Keyboard, enumerate
      
@par Directory contents

  - USB_Device/HID_Standalone/Src/main.c                  Main program
  - USB_Device/HID_Standalone/Src/system_stm32f4xx.c      STM32F4xx system clock configuration file
  - USB_Device/HID_Standalone/Src/stm32f4xx_it.c          Interrupt handlers
  - USB_Device/HID_Standalone/Src/usbd_conf.c             General low level driver configuration
  - USB_Device/HID_Standalone/Src/usbd_desc.c             USB device HID descriptor
  - USB_Device/HID_Standalone/Inc/main.h                  Main program header file
  - USB_Device/HID_Standalone/Inc/stm32f4xx_it.h          Interrupt handlers header file
  - USB_Device/HID_Standalone/Inc/stm32f4xx_hal_conf.h    HAL configuration file
  - USB_Device/HID_Standalone/Inc/usbd_conf.h             USB device driver Configuration file
  - USB_Device/HID_Standalone/Inc/usbd_desc.h             USB device HID descriptor header file  

@par Hardware and Software environment

  - This application runs on STM32F429ZI devices.
    
  - This application has been tested with STMicroelectronics NUCLEO-F429ZI  boards 
    and can be easily tailored to any other supported device and development board.

  - NUCLEO-F429ZI  Set-up
    - Connect the NUCLEO-F429ZI  board to the PC through 'USB micro A-Male 
      to A-Male' cable to the connector: 
    - CN13: to use USB Full Speed (FS)

  - Make sure that the jumper JP4 is closed

@par How to use it ?

In order to make the program work, you must do the following :
 - Open your preferred toolchain 
 - Rebuild all files and load your image into target memory
 - Run the application
  

   */
